iWA1 PRO

Have almost all the features of bike stand. For display stand when you do not ride on bike, and for maintenance stand after you ride bike.

• Bike stand to hold carbon frame bikes securely.
• It is very easy to use, as you can display and maintain the bike by simply placing it on top.
• Solid maintenance, parts replacement, daily inspections, and room display all in this stand.
• Can be used with either thru-axle bike or quick release bike.
• Allows the rear wheel to float while holding the bike firmly in place.
• Use of a workbench reduces physical strain when performing maintenance for long periods of time.
• The stand and workbench can be detached for use according to the method of use.

Easy to use as it can be used by simply placing the bike on it.
The carbon frame bike can be used simply by placing the bike on top for both display and maintenance, making it easy for anyone to use.

From maintenance to storage, all in this one.
Solid maintenance, daily inspections, interior displays, This bike stand has almost all the features you need to stand.

Use of a workbench reduces physical strain.
Maintenance can be performed at a high position without bending down, which reduces the burden on the body when performing maintenance for long time.

Easy maintenance around the forks by removing the front wheel.
Attachment parts that allow the front wheel to be removed for work, making it easy to clean around the fork.The handle can also be fixed so that maintenance around the handle can be performed smoothly.

Less likely to damage the bike or floor.
The part that comes in contact with the bike frame is PE coated to prevent scratching the bike, and the part that comes in contact with the floor surface is made of rubber to prevent damage to the room.

Because it is supported by a BB, it can be used regardless of the type of brake.
It can be used with a wide range of brakes, including disc brakes and rim brakes.It can also be used for both quick release and through-axle.

Compact storage is possible.
Dedicated workbench can be folded for compact storage.

Included parts tray improves work efficiency.
The special parts tray can be used to insert tools and small parts, increasing work efficiency.

" iWA1" maintenance & display stand

" iWA1 Fork Support" attachment

*Fork end width other than 100 mm cannot be used.
*Be sure to use with the rear wheels attached.


" iWA1-PD " work bench

Acceptable bike models
iWA1

• Road bike, Cross bike , MTB*1, Mini velo, Cyclo-cross bike, Gravel bike
• From 20 to 29 inch bike
• Under 40 mm tire width.
• Over 51 mm BB width.*2

"iWA1 Fork Support" attachment

• Quick release, Thru-axle
• Weight capacity : 10kg
• *Fork end width other than 100 mm cannot be used.
• *Be sure to use with the rear wheels attached.

"iWA1-PD" work bench

• Weight capacity : Equivalent to the load capacity of iWA1, iWA1 Fork Support.

※1…Under 40 mm tire width.

※2…*Depending on the shape, some model may not be used.

*Notice:Depending BB shape, the bike might be unsteady.(In this case, please use velcro for fix)

*Notice:Except 640 mm (±50 mm) from BB to front hub bike tire may touch floor.

*Notice:Depending on the shape, 640 mm (±50 mm) bike could might touch floor.

*Notice:If the rear wheel is removed while the fork support is in use, it may lose balance and fall forward.

*Notice:Through-axle and quick release is not included. Please use the one that comes with your bike.

宅配運費$250 - 滿$5,000免運

旗艦店自取免運費 - 安裝另計