iWA A01 HD

Horizontal stand and in-vehicle carrier are OK with this one unit!
Lightweight and easy to carry, multifunctional carrier stand.

• Carrier stand that can be used either as a horizontal stand or as an in-vehicle carrier.
• When placed horizontally, the bike can be secured simply by inserting the tire.
• When mounted on the vehicle, the front wheel and bike can be secured separately so the tires do not roll inside the vehicle while driving.
• Can be used with disc brake, through-axle, and quick-release bikes.
• Since it holds the bike, it can be used for light maintenance and for washing the car using foam cleaner without water.

As an in-vehicle carrier when traveling by car, and as a horizontal stand when leaving bike outside.
It can be used as both an in-vehicle carrier and a horizontal stand, making it perfect for preparation and temporary storage before cycling.

Designed for easy use by simply inserting the tire into a stand.
Three plastic parts firmly support the tire, so when placed horizontally, the tire can be stored simply by inserting.

The front wheel and bike can be secured separately when mounted on the vehicle.
The front wheel and bike can be secured separately in the car, allowing them to be stored in a small space.
There is no need to worry about tires rolling while driving.

Stability for light maintenance and washes.
When placed horizontally, the tires are sandwiched between plastic parts, so they are highly stable even when performing maintenance such as inflating, changing pedals, or wiping down with foam cleaner, etc.

Can be used in a variety of vehicles.
It is designed to fit in as many vehicles as possible, including small SUVs, station wagons, minivans, and wagons, and has actually been tested on them.

Compact and lightweight.
It is compact, with a height of 600 mm, width of 400 mm, and depth of 420 mm, and weighs only 2.24 kg.

Over 100 hours of test driving.
Tested for over 100 hours in various locations and driving methods to ensure safe transportation of important bicycles as an in-vehicle carrier. (Tested with a road bike weighing 8 kg)
*This does not guarantee the uprightness of the bike.

Velcro is used to secure when mounted in a vehicle
The way to secure the bike when mounted in the car is to use the car's carpet and Velcro tape.
This allows the bike to be securely fastened without damaging the car.

Acceptable bike models

• For stand:road, cross, cyclo-cross, gravel, mini cro (18 - 20 inch)
• For vehicle carrier:road, cross
• Acceptable tire width:under 650c = 60 mm / under 700c= 35c
• Quick release and thru-axul (12 mm)
   

If the cargo area of the car is carpeted, attach it with a male Velcro tape attached to the A01HD.If the cargo area of the car is plastic or metal, attach the enclosed female Velcro tape for backside adhesion to the car and attach it with a male Velcro tape attached to the A01HD.
*If the Velcro tape is to be stuck to the carpet in the cargo area, it is possible to change its position in the cargo area or use it in other cars,However, if the cargo area of your car is not carpeted, the Velcro tape cannot be repositioned in the cargo area because it cannot be reattached after the tape is attached.
We recommend that you check to see if your bike can be used to your car before you purchase the product.
Please remove the front wheel of the road bike you wish to load and lift the bike 8 cm by hand on your car.
Make sure that the saddle or handle does not touch the cargo ceiling or back door when lifted 8 cm.
*You may have to lower the seat post or remove the saddle depending on the size of your car or bike.
:Depending on the slope of your vehicle and cargo area, it may be necessary to pull the bike considerably toward the driver's or passenger's side to be able to mount it.
※When in-vehicle, when closing the door of the car, be sure to check that the steering wheel, brake lever, etc. do not hit, and fi it seems to hit, adjust one.It may damage the bike or car door and glass.
 

宅配運費$250 - 滿$5,000免運

旗艦店自取免運費 - 安裝另計