iWA TOWER - Self standing 2 bikes stand 自立式雙車停放架

•自行車展示架隆重登場!最多可放三台自行車!
•免打孔設計:不需在牆面鑽孔,安裝更自由
•不受天花板高度與強度限制
•支架位置可自由調整,符合多種空間需求
•輕鬆擺放車輛:輪胎插入式樹脂零件,快速固定
•便利保養與零件更換設計
•支撐上管設計:可穩固放置大型車與重型車
NT$10,000
NT$11,000
商品編號:
供貨狀況: 尚有庫存

此商品參與的優惠活動

加入最愛
商品介紹

•自行車展示塔隆重登場!最多可放三台自行車!
•免打孔設計:不需在牆面鑽孔,安裝更自由
•不受天花板高度與強度限制
•支架位置可自由調整,符合多種空間需求
•輕鬆擺放車輛:輪胎插入式樹脂零件,快速固定
•便利保養與零件更換設計
•支撐上管設計:可穩固放置大型車與重型車
•適用車種:
 -大尺寸輪胎自行車
 -重型自行車
 -裝有擋泥板的自行車
•多項可調功能,對應各種自行車
 -掛勾高度、寬度、角度可調
 -矽膠材質,溫柔固定車體
•附贈前輪固定帶,穩固防滑不搖晃
•雙車支撐穩固無虞,即使是重車也OK!
•讓你的空間保持清潔整潔
 -輪胎不直接接觸地板與牆面
 -接觸地面處採橡膠材質,穩固防滑
 -防止車把碰撞牆面造成損傷
•適用多種自行車!

 

Two bikes can be stored in the space of one bike and tires can be secured with plastic parts for easy maintenance!

 

 Acceptable bike models 

  Road bike, Cross bike , MTB, Mini velo, Cyclo-cross bike, Gravel bike, E-bike, Semi fat tire bike, Fat bike.

  Acceptable Tire width (when using plastic parts) : under 82 mm (3.2 inch)

 

Freestanding 2-bike stand

The self-standing stand is easy to set up and can be easily moved for cleaning or redecorating the room. It does not use the ceiling like a support rod type, so there is no need to worry about the strength of the stairwell or the ceiling.

 

Resin parts can hold the bike by simply inserting the tire.

For easy maintenance & parts replacement!

 

Supported by the top tube makes put large bikes and heavy bikes possible!

It is sturdy enough to carry up to 25 kg per bike, and can even carry two heavy bikes, such as a mountain bike and an e-bike.
※Acceptable Tire width (when using plastic parts) : under 82 mm (3.2 inch)

 

Silicone material held bike gently.

The hooks that contact the bike frame are silicone covered to hold it gently and securely.

 

When storing one bike, you can hang your cycle equipment on the available hooks.

 

Includes belt to secure front wheels.

The included Velcro keep the bike upright and stable, and the handlebars can be secured to reduce the risk of damaging the wheels or staining the walls.

 

To keep room clean

Tires do not contact floors or walls / Rubberized to floor contact parts / Prevent contact between handle and wall.

 

It saves space because the bikes can be stored upright.

 


 

規格說明
 Size
approx.W500-820 X D550 X H2150 mm
 Material  steel
 high-strength resin (tire contact part)
 silicon (bike contact part)
 rubber(Floor contract)
 Weight  approx. 11 (kg)
 Acceptable tire width  When using plastic parts ▶under 82 mm (3.2 inch)
 Weight capacity  25 kg/bike (total 50 kg)
 Hook working range  angle -17°~+17° / width 30~40 (cm)
 Color  black and silver / black / white

 

※Please do not use a bike without a top tube, as it cannot be held stable.

※It is designed to be movable so that the angle can be easily adjusted after the bike is placed on the hanger. However, if you tighten it tightly, the 25 kg bike will not move unexpectedly.

※Do not use with bikes that exceed the load capacity.(25kg/bike)

※Do not use bikes with long overall lengths or bikes with a large difference in weight balance between.

※hook marks may stain on the surface of the frame depending on the composition of the frame paint. If you are concerned about discoloration, wrap a cloth around the hooks to prevent direct contact with theframe

運送方式

宅配運費$250 - 滿$5,000免運

旗艦店自取免運費 - 安裝另計

已加入購物車
已更新購物車
網路異常,請重新整理